Installation Information

New Deck

Step One:
Drill a 1 1/8" hole in the centre of the post/leg.
Drill bit sold here
Levelling deck step 1

Step Two:
Attach top of the Leveller to bottom of post/leg using 3, #8 screws

Levelling Deck Step 2
Step Three:
Thread in bottom (screw side) of leveller.
Levelling Deck Step 3
Step Four:
Place beam on top of the leveller and adjust the height. Secure by adding 3 #8 screws once deck has been levelled.
Install complete!
Levelling Deck Step 4


Sagging Deck

Step One:
Jack up deck to relieve weight off of deck post.
levelling deck

Step Two:

Drill a 1 1/8" hole in the centre of the post/leg.
Drill bit sold here

levelling deck
Step Three:
Attach top (nut side)of the Leveller to bottom of post/leg using 3, #8 screws
levelling deck
Step Four:
Thread in bottom (Screw side) of leveller. 
levelling deck
Step Four:
Place beam on top of the leveller and adjust the height. Secure by adding 3 #8 screws once deck has been levelled
Install complete!
levelling deck